- You are here:Measuring Instruments
- Products
- For 3D Measurement
- Non-contact 3D Digitizer
- KONICA MINOLTA RANGE5
- Advantage
Non-contact 3D Digitizer
Measuring Instruments
KONICA MINOLTA RANGE5
Non-contact 3D Digitizer
NEW
The Visionary Eye.
Creating the Future Style of Manufacturing.
Non-contact 3D digitizer suitable for industrial applications requiring high accuracy and reliability.
Advantage
Industry’s top level for measuring shiny surfaces and dark surfaces
- Measures dark surfaces without spraying or a darkroom -
<Merit>
- Eliminates measurement errors caused by uneven spray layer thickness!
- Eliminates need for preparation and disposal of sprayed objects!
- Reduces environmental loads by eliminating spray and cleaning fluids!
- Able to scan in a normal working environment (office environment*3)!
- Eliminates the need for a darkroom (supplemental equipment)!
Dark surface scanning example
Shiny surface scanning example
The KONICA MINOLTA RANGE5 has been highly appreciated by mold and parts makers in design and production for scanning a broad range of works such as stampings, machined parts, molds, prototypes, castings, forgings and plastic parts since its introduction in March 2008. Utilizing our data-processing technology, the KONICA MINOLTA RANGE5 was able to measure even shiny surfaces without the spray generally required for ordinary non-contact digitizers. Now, the KONICA MINOLTA RANGE5 has evolved even further to conquer measurement of dark objects (down to reflectances of approx. 2.5%*1) without spray or a darkroom.*2
An upgrade service to add this function to previously purchased KONI CA MINOLTA RANGE5 scanners is also available. Contact your nearest service facility for more information.
- *1
- Reflectance at 660nm excluding specular reflectance. Based on KONICA MINOLTA standard measurement conditions.
- *2
- Although performance has been greatly improved compare to our previous instruments, there is no guarantee that the KONICA MINOLTA RANGE5 can measure all dark surfaces or shiny surfaces without spraying. Whether or not treatment of the surface prior to measurement is necessary depends on actual use conditions, and test measurements are recommended.
- *3
- 500 lx or less
