Measurement Utility Software FD-S2w
Changes from previous version
Changes from Ver. 1.60r2 to Ver. 1.61r2 (OS X / macOS version only)
Specification Changes:
- macOSTM 10.15 has been added to the list of compatible OS.
- OS X® 10.9 has been removed from the list of compatible OS.
Changes from Ver. 1.50 to Ver. 1.60
Specification Changes:
- macOSTM 10.14 has been added to the list of compatible OS.
- KONICA MINOLTA AccurioLabel 230 has been added to the list of compatible printer models for density balance/color density control.
Bug fixes:
- When measuring high-density samples using the FD-7 or FD-5, a lower-limit clipping value of 0.01% is applied to prevent negative values.
- Various minor bugs have been fixed.
Changes from Ver. 1.41 to Ver. 1.50
Specification Changes:
- macOSTM 10.13 has been added to the list of compatible OS.
- KONICA MINOLTA bizhub PRO 1100 and AccurioPress 6136 have been added to the list of compatible printer models for density balance/color density control.
Bug fixes:
- Various minor bugs have been fixed.
Changes from Ver. 1.40 to Ver. 1.41
Specification Changes:
- KONICA MINOLTA AccurioPress C3080 has been added to the list of compatible printer models for density balance/color density control.
- When performing initial color density control for maximum density, the average density of patches with the same definition values can be displayed.
- Automatic detection of patch position can be performed even if the chart orientation or size is different from the chart definition data.
- Default names for chart definition data and measurement data have been changed.
Bug fixes:
The following bugs have been fixed:
- Other minor bugs.
Changes from Ver. 1.31 to Ver. 1.40
Specification Changes:
- KONICA MINOLTA AccurioPress C6100 has been added to the list of compatible printer models for density balance/color density control.
- Additional paper sizes (SRA3, 12×18, 13×19) have been added for density balance/color density control.
- Automatic connection to FD-9 at startup has been improved to only search for the FD-9 which was most recently connected.
Bug fixes:
The following bugs have been fixed:
- Other minor bugs.
Changes from previous version
Changes from Ver. 1.30 to Ver. 1.31
Bug fixes:
The following bugs have been fixed:
- Problem in which a message warning that the color information for the measured chart and that of the chart definition for the selected defined chart do not match was not shown.
- Problem in which an error message was shown when measuring the tiles for diagnosis measurements.
- Other minor bugs.
Changes from Ver. 1.20 to Ver. 1.30
Specification changes:
- OS X® 10.11 and macOSTM 10.12 have been added to the list of compatible OS.
- Measurement is now possible even if the color information in the chart being measured and that of the chart definition for the selected defined chart do not match.
- Detailed error messages regarding patch detection errors have been added.
Bug fixes:
The following bugs have been fixed:
- Minor bugs.
Changes from Ver. 1.12 to Ver. 1.20
Specification changes:
- KONICA MINOLTA bizhub PRESS C2070 and C71cf been added to the list of compatible printer models for density balance/color density control.
- QR codes on charts for density balance/color density control can be read and used for identifying charts during density balance/color density control measurements.
- Defined chart data can be rotated or flipped and columns/rows can be exchanged.
- The order of automatic patch ID assignment for defined chart data can be selected as horizontal or vertical.
- Whether or not to automatically connect to the FD-9 during startup can be selected.
Bug fixes:
The following bugs have been fixed:
- Minor bugs.
Changes from Ver. 1.10 to Ver. 1.12
Bug fixes:
The following bugs have been fixed:
- Problem which prevented continuing measurements when error occurred while using optional Auto Sheet Feeder FD-A09. Whether measurements should be paused or continued when error occurs can be selected.
- Problem which prevented automatic removal of chart from job chart list in FD-9 display after measurement. Whether or not chart should be disabled and removed from job chart list on FD-9 can be selected.
- Problem with automatic patch detection when using defined charts and measuring charts consisting of only low-density patches.
- Problem with density balance chart definition files (Type2 SRA3 size) for KONICA MINOLTA bizhub PRESS C1070/C1100.
- Problem reading CGATS format chart definition file.
- Problem with saving TIFF image data (number of bits, RGB/CMYK/Multi-Color output handling).
- Measurements which were not completed successfully are indicated by red background.
- Other minor bugs.
Changes from Ver. 1.01 to Ver. 1.10
Specification changes:
- Windows® 10 Pro 64-bit has been added to the list of compatible OS.
- 32-bit versions of Windows® operating systems have been removed from the list of compatible OS.
- QR codes for identifying charts can be added to defined charts and used for identifying test charts during measurements.
- Solid-color chart measurements to check printing evenness can be performed.
- Maximum chart length has been increased from 660mm to 1500mm. (Minimum chart length is unchanged at 170mm.)
- Simplified Chinese, German, French, and Spanish have been added to display languages.
Bug fixes:
The following bugs have been fixed:
- Problem with automatic measurement patch detection function when taking measurements using defined charts.
- Problem with saved CxF file format.
- Other minor bugs.
