Data Management Software CL-S10w

Changes from previous version

Changes from Ver1.41 to Ver1.42

Bug fixes:

  • Several minor bugs have been fixed.

Changes from Ver1.40 to Ver1.41

System requirements:

  • Windows® 11 Pro has been added to the list of compatible OS.
  • Windows® 7 Professional 32-bit, 64-bit and WindowsⓇ 8.1 Pro 32-bit, 64-bit have been removed from the list of compatible OS.
  • Windows ExcelⓇ 2019 32-bit, 64-bit and WindowsⓇ 2021 32-bit, 64-bit have been added to the list of compalible application softwre.
  • Windows ExcelⓇ 2013 32-bit, 64-bit have been removed from the list of compatible application software.

Bug fixes:

  • Several minor bugs have been fixed.

Specification change:

  • Memory Integrity in "Windows Security" is now supported.

Changes from Ver. 1.31 to Ver. 1.40

System requirements:

  • Windows® 10 Pro 32-bit, 64-bit have been added to the list of compatible OS.
  • Windows® XP Professional 32-bit SP3, 64-bit SP2 and Windows® 8 Pro 32-bit, 64-bit have been removed from the list of compatible OS.
  • Windows Excel® 2013 64-bit, Windows Excel® 2016 32-bit and Windows Excel® 2016 64-bit have been added to the list of compatible application software.
  • Windows Excel® 2003 has been removed from the list of compatible application software.

Note: CL-S10w 32-bit edition should be used with 32-bit versions of Excel and CL-S10w 64-bit edition should be used with 64-bit versions of Excel. Compatibility between each CL-S10w edition, operating system, and application software is as follows:

Bug fixes:

The following bugs have been fixed:

  • Problem in which it was not possible to connect with the CL-500A if the decimal separator for the operating environment was set to "," (comma)
  • For correlated color temperature list items, the JIS method list item and Konica Minolta method list item are clearly identified.
  • Problem in which the options "Confirm overwrites" and "Update in same place" could not be enabled when taking measurements using the instrument's measuring button.
  • Other minor bugs.

Changes from Ver. 1.30 to Ver. 1.31

Bug fixes:

The following bugs have been fixed:

  • Problem when using Excel 2013 in which when CL-S10w was registered the first time as an add-in, CL-S10w disappeared from the add-in list when Excel 2013 was closed and restarted.
  • Problem when reading measurement data stored in the CL-500A memory in which luminance, scotopic luminance, and S/P ratio may not be uploaded properly.
  • Problem when reading measurement data stored in the CL-500A memory in which the measurement date and time may be blank.
  • Other minor bugs.

Changes from Ver. 1.20 to Ver. 1.30

Specification changes:

  • Additional combinations in system requirements:
    OS: Windows 8 Pro 32 bit, Windows 8 Pro 64 bit
    Application software: Excel 2010 32 bit, Excel 2013 32 bit (when using Windows 8 OS)
  • Addition of scotopic lux and S/P ratio to measurement data items for upload from instrument
  • Addition of the following Excel templates:
    Template_CRI&Spectral.xls: Simultaneous display of CRI (Color-Rendering Index) and spectral waveform
    Template_MacAdamEllipse.xls: Display of MacAdam SDCM level ellipses
    Template_MacAdamEllipse_shifted.xls: Display of MacAdam SDCM level ellipses
  • Cursor is moved to the data start cell at the time measurement is started for all Excel templates.
  • Measurement data clear button has been added to all Excel templates.

Bug fixes:

The following bugs have been fixed:

  • Various minor bugs

Changes from Ver. 1.10 to Ver. 1.20

Specification changes:

  • Measurement range for correlated color temperature by JIS method has been expanded to
    1,563 ≤ Tcp < 100,000; -0.1 ≤ ∆uv ≤ +0.1.

Note:

If you are using CL-S10w with a CL-500A, it is strongly recommended that you also upgrade the firmware of the CL-500A to the latest version. (Click here to go to the firmware update page.) If the CL-500A firmware is not upgraded, the measurement range will be different when the instrument is used standalone compared to when it is used with CL-S10w.

  • The CL-500A firmware version can be checked by pressing Enter/MENU, selecting "System", and then selecting "Info(SerNo/Ver)".
  • When updating CL-S10w, please uninstall the previous version before installing the new version. For details on uninstallation and installation procedures, please refer to the CL-S10w Installation Guide.
Specification differences for CL-500A firmware and CL-S10w or CL-SDK software version combinations
  CL-500A
Previous version
(Ver. 1.0)
New version
(Ver. 1.1 or higher)
CL-500A used standalone CL-500A previous specification
(Note 1)
CL-500A new specification
(Note 2)
CL-500A used with software
(CL-S10w or CL-SDK)
Previous version
CL-S10w: Ver. 1.1 or lower
CL-SDK: Ver. 1.0 or lower
Software previous specification
(Note 3)
Software previous specification
(Note 3)
New version
CL-S10w: Ver. 1.2 or higher
CL-SDK: Ver. 1.1 or higher
Software new specification
(Note 4)
Software new specification
(Note 4)

Table notes

Note 1

CL-500A previous specification:
Correlated color temperature Tcp(K) determined by Konica Minolta original method
Measurable range: 2,300 ≤ Tcp ≤ 20,000; -0.1 < ∆uv < +0.1

Note 2

CL-500A new specification:
Correlated color temperature Tcp(K) determined by JIS method
Measurable range: 1,563 ≤ Tcp < 100,000; -0.1 ≤ ∆uv ≤ +0.1

Note 3

CL-S10w or CL-SDK previous specification:
Konica Minolta original method or JIS method for determining correlated color temperature Tcp(K) can be selected.
Konica Minolta original method: Measurable range: 2,300 ≤ Tcp ≤ 20,000; -0.1 < ∆uv < +0.1
JIS method: Measurable range: Approx. 1,570 ≤ Tcp; -0.03 ≤ ∆uv ≤ +0.03

Note 4

CL-S10w or CL-SDK new specification:
Konica Minolta original method or JIS method for determining correlated color temperature Tcp(K) can be selected.
Konica Minolta original method: Measurable range: 2,300 ≤ Tcp ≤ 20,000; -0.1 < ∆uv < +0.1
JIS method: Measurable range: 1,563 ≤ Tcp < 100,000; -0.1 ≤ ∆uv ≤ +0.1

Changes from Ver. 1.00 to Ver. 1.10

Compatible instruments:

  • " Compatibility with Illuminance Spectrophotometer CL-500A Firmware Update added

Specification changes:

  • Addition of Excel templates for multi-point measurement.
  • Addition of Excel templates for CRI (color rendering index) and spectral measurements when using CL-500A

Back to top